Lite sanyi coil inji
Lite sanyi coil inji
Shigowa da
Kayan aikin na iya haɗawa da injin neman buga allo na atomatik ko injinan kwamfuta na atomatik don kammala aikin murfin. Wannan kayan aikin ƙanƙanta da m, kuma na iya kammala aikin sanyi. Takardar tana buƙatar a warke ta hanyar wani injin UV kafin ya shiga cikin wannan injin.
(Sanyi na sanyi)
Sigogi masu aiki
| Abin ƙwatanci | Qc-106-lt | QC-130-lt | Qc-145-lt |
| Girman Max | 1100x780mm | 1320x8880mm | 1500x10.550mym |
| Girman takarda | 540X380mm | 540X380mm | 540X380mm |
| Max Buga Girma | 1080x780mm | 1300x820mmm | 1450x10.55050mm |
| Kauri | 90-450 g / ㎡ Cold tsare: 157-450 g / ㎡ | 90-450 g / ㎡ Cold tsare: 157-450 g / ㎡ | 90-450 g / ㎡ Cold tsare: 157-450 g / ㎡ |
| Max diamita na fim | 250mm | 250mm | 250mm |
| Max nisa na fim | 1050mm | 1300mm | 1450mm |
| Saurin isar da | 500--4000Sheet / h Cold na Cold: 500-1500sheet / H | 500-3800sun 1 h Cold na Cold: 500-1500sheet / H | 500-3200sheet / h Cold na Cold: 500-1200sheet / H |
| Total ikon kayan aiki | 13K | 15KW | 17 y |
| Jimlar nauyin kayan aiki | ≈1.3t | ≈1.4t | ≈1.6t |
| Girman kayan aiki (lwh) | 2100x2050x1500mm | 2100x2250x1500mm | 2100x2450x1500mm |
Babban fa'ida
A.Piper tsotsa da gada:
Sanye take da dandamali mara kyau, ana iya daidaita tsayi da ƙasa.i iri-iri na iya dacewa da kayan aikin gaba
B.Front gauga:
Ta hanyar saita ma'aunin gaban ta gaban hoto da allon taɓawa, za'a iya haɗa kayan da aka yi kuma shigar da kayan sawa a cikin ɗakin kwana
C.HIG zazzabi mai tsauri silicon matsin lamba:
Dalili mai tsafta na dumama, zafin jiki yana da kyau tare da ƙarancin rashin nasara da rayuwar sabis
D.inclerwararren mace-inji mutum-na'ura
Ayi amfani da allon taɓawa, mai sauƙi don aiki da kafa
E.Amote haɓakawa da matsala:
Dawo da Sietemens Jamus PLC don sarrafawa mai sauri, tare da sauri da tsayayyen amsa. An sanye take da tsarin cibiyar sadarwa, zai iya gano matsaloli na ganowa da tabbaci da gyara shirye-shirye.
F.Burity
Kayan aikin sun yi rikodin silinda mai haɓakawa don ƙa'idar matsin lamba, yana sa matsin lamba mafi tsoratarwa.
G.Jump tsare tsare:
Ana iya saita shi ta hanyar PLC tsarin don kammala matakan tsallakewa tsakanin takarda zuwa takarda zuwa matsayin na zinare a cikin takarda ɗaya.
H.
Babban madaidaicin bangon waya: An sarrafa shi tare da farantin 25mm karfe, tabbatar da mafi tsadar kayan aiki.
I.optional FIL Stame:
Injin ya dace da Core 1-Inch Core ko 3-Inch Core Core na (Takardar Talla na Musamman da kuma ana iya amfani da takarda mai hoto
J.ADOPGING CLAMPT:
Saukarwa mai sauƙi tare da takarda mai sauƙi, kuma amintaccen aiki na shaft.
